
Add to Cart
104*104mm Flashing Led Lights Reflective Aluminum Cat Eye Warning Traffic Pavement Marker Solar Road Stud
Solar road studs, also known as solar cat eyes, are often placed on the road surface and provide guidance and hazard warnings to drivers in darkness and bad weather. Aluminium solar studs are sustainable using free solar energy, which reduces environmental impact and saves costs. The bright flashing LEDs are very effective at getting the attention of drivers much earlier than traditional spikes, greatly improving road safety.
Product Name | Solar Road Stud |
Item Name | TYNDD2 |
Material | High pressure casting aluminum |
LED | Dia 5mm, 3pcs/side |
Color | White/Green/Blue/Yellow/Red |
Mode | Flashing&Steady Charging at daytime and working automatically at night. |
Size | 104*103*23mm |
Battery | NI-MH Battery 1.2v/600mAH |
Solar Panel | 2V/0.3W |
Resistance | >20T(Static) |
Warranty | 12 months |
1. Safety protection. Set up safety isolation facilities in the construction area, such as road cones, construction diversion signs, reflective clothing, etc., to ensure the safety of construction workers.
2. Determine the installation location. Use a ruler to determine the installation location. Generally, install one every 15 meters to ensure that the installation location is flat and free of expansion, cracks, and unevenness.
3. Clean the mounting surface. Use a brush to clean the installation location to ensure it is dry and dust-free.
4. Apply glue. Choose the appropriate glue, such as epoxy resin glue, and mix it in the correct ratio and apply it evenly on the road studs.
5. Install road studs. Press the road stud into the installation position, making sure the direction is correct. If there is too much glue, clean it up.
6. Deal with the hole location. For cast aluminum spikes with feet, it is necessary to ensure that the hole depth is 1cm greater than the nail foot depth and the hole diameter is 2mm greater than the nail foot diameter.
7. Inspection and cleaning. After the installation is completed, conduct an inspection to ensure that all road studs are installed correctly and are not installed backwards, crooked or crooked. Use a scraper to scrape off the spilled glue and clean the road surface.
8. Solidify and remove isolation facilities. It will take about 4 hours for the glue to solidify before removing and installing the isolation facilities.
Solar road studs can be used in public places such as highways, urban roads, parking lots, gardens, roadsides, and roads without conventional street lights to warn drivers of approaching road dangers.
Outer packing: Standard packing
For a small quantity of orders or sample order, we will generally choose to transport by air (DHL, TNT, etc)
Large orders we generally use the ocean shipping.
Roadsafe Group Limited was founded in 2005, we have our own factory to make all kinds of road safe products, our products could sell all around the world.Our most advantageous products are all materials road studs, especially ABS road stud which enjoys the high quality and low price in China. Meanwhile, we have other traffic products, such as traffic cone, delineator, delineator post, convex mirror, guardrail board, beads reflective panel, reflective films, traffic light, warning board, traffic paint, etc.We always put quality first, customer supreme, the observance of good faith-based.
1.OEM Service
Your own design is appreciated; we can make the approval sample according to your golden sample.
2. QC Service
a) Before the order to be confirmed, we should check the material & color of fabric by sample which should be strictly.
b) We will be tracing the different phase of production from the beginning.
c) Every bad quality will be checked & cleaned before packing.
d) Before delivery clients could send one QC or point the third party to check the quality.
e) We will try our best to help clients when problem occurred.
3. After-sale Service
a) EXW, FOB, C&F are also available for us.
b) If the products need certificate, we can also provide.
Q:Can I get a sample before bulk order ? how can I get it ?
A:Sample is free ,but freight collect.
You may tell us your express account No.
Also you could prepay the freight cost by Western union, we will send out sample asap once getting your payment.
Q:Can you do customers' styles?
A:Yes ,just send us the drawing ,then we could open a new mould for you to produce it as your request.
Q:Is this retail product?
A:sorry, it is wholesale product .
Q:Can we visit your factory ?
A:Certainly.welcome your visit.
Q: How to ensure the cargo quality?
A:We will supply bulk sample before shipping.They can represent the cargo quality.
Q: Why choose Roadsafe-Group Limited?
A:We are a manufacturer not trading company, we have produced the road safe products for years in Beijing, so the
price is quite competitive in the market, and the quality is suprior.
Q: What's the payment method?
A:T/T: Accept USD, EUR.
Western Union: Quickly to the account, Priority in delivery
Behalf Paying: Your Chinese friends or your Chinese agent can pay for in RMB.